WalkieStackers.com Logo Top Curve
Presented By Solution Dynamics, Inc. 1-877-860-3620
location :: home : big joe : pds30/40

Big Joe PDS30/40

Big Joe PDS30

Big Joe PDS30/40 Power Driven Stacker

Big Joe's PDS30 and PDS40 are easy to use and maintain. The PDS30/40 is a good choice for general material handling, stacking and work positioning in tight areas.

Standard Equipment Includes:
  • Crawl speed travel control
  • Wrap around steel bumper
  • Neutral braking
  • Two speed lower
  • Programmable performance travel / plugging / braking
Ships From:
US Map Wisconsin
Wisconsin
Made By:
Big Joe Logo
Request Quote
PDS30 & PDS40 24" Load Center ITA Class II Fork Carriage
ModelCapacityMastHeightAdjustable Straddle LegsLift SpeedTravel SpeedShip*
Weight		Quote
Form
LiftColFreeExtLengthIDODEmptyLoadedEmptyLoaded
PDS30-1043,000 lbsTelescopic104"71"6"142"42"38"-50"46"-58"40fpm35fpm3.4mph3.1mph2042 lbsQuote
PDS30-1263,000 lbsTelescopic126"83"6"165"42"38"-50"46"-58"40fpm35fpm3.4mph3.1mph2172 lbsQuote
PDS30-1423,000 lbsTelescopic142"91"6"178"42"38"-50"46"-58"40fpm35fpm3.4mph3.1mph2239 lbsQuote
PDS30-1573,000 lbsTriMast157"71"50"193"42"42"-50"50"-58"40fpm35fpm3.4mph3.1mph2444 lbsQuote
*PDS30-1773,000 lbsTriMast177"79"58"213"42"42"-50"50"-58"40fpm35fpm3.4mph3.1mph2539 lbsQuote
PDS40-1044,000 lbsTelescopic104"72"6"142"42"42"-50"50"-58"37fpm32fpm3.4mph3.1mph2042 lbsQuote
PDS40-1264,000 lbsTelescopic126"83"6"165"42"42"-50"50"-58"37fpm32fpm3.4mph3.1mph2172 lbsQuote
PDS40-1424,000 lbsTelescopic142"91"6"178"42"42"-50"50"-58"37fpm32fpm3.4mph3.1mph2239 lbsQuote
PDS40-1574,000 lbsTriMast157"72"50"193"42"42"-50"50"-58"37fpm32fpm3.4mph3.1mph2444 lbsQuote
*PDS40-1774,000 lbsTriMast177"80"58"213"42"42"-50"50"-58"37fpm32fpm3.4mph3.1mph2539 lbsQuote

*Note: Ship Weight includes chassis only. Derate 1000 lbs above 162". TriMast minimum ID 42" - OD = ID + 8".

  • Lift cylinder has hard chrome plated rods. Pump unit including motor, solenoid, gear pump, and pressure compensated lowering valve are mounted high in the power compartment for ease of service.

  • 24-Volt ZAPI AC O inverter, travel control with matching drive motor provide high performance throughout the entire speed range. Travel speed remains constant relative to throttle position regardless of load. Separately fused power control circuits, quick disconnect EPD power cut off, hour meter / battery discharge indicator combination gauge complete the system. Power configurations and diagnostic features are displayed with a ZAPI handheld console.

  • Regenerative electromagnetic brake is mounted on motor armature shaft multiplying the braking power through the ZF GK10 transmission. Brake is applied when control arm is in the vertical or horizontal handle position. System features anti-roll back and neutral braking.

  • Travel, lift, and lower functions are located in the ergonomic operator handle. All operator controls are accessible without having to lift the hand from the handle.

  • Angle grips are designed to allow easy operation with either hand. Wrap around guard, reversing switch, thumb control, and horn are standard.
  • Low mounted tiller arm offers excellent operator comfort and minimum steering effort. Gas assisted spring handle gently returns handle to vertical position.

  • Crawl speed function with steer handle at 5° back-tilt from vertical allows for ease of use in tight areas.

  • Vertically mounted drive motor is direct mounted to gear housing. Oil bathed ZF GK10 hypoid bevel gear drive train with tapered roller bearings transfers power to axle. State of the art optimized gear technology supplies advantages such as minimal envelope circle, zero maintenance, low noise level, high efficiency and high performance.

  • Removal of two piece power head cover exposes major components for inspection and maintenance

  • Bolt-on high visibility mast, I-beam construction, lift cylinders positioned in outer I-beam for best view through mast.

  • Three inch wide adjustable straddle legs allow ease of use in racked aisles. Straddle leg inside dimension (ID) can be set at 38" to 50" in 4" increments; 42" to 50" with the triple stage mast

  • Class two ITA fork carriage with 36" tall load back rest. Forks are adjustable form 8" ID to 30" OD

  • Cold Conditioning
  • ClearView Mast Guard
  • Drive Tire Rubber Lug
  • Dire Tire Poly Siped
  • 36" Long Forks
  • Side Shifter
  • 48" Long Forks
  • 48" High Back Rest
Related Product Lines
Big Joe PDI
Big Joe PDI Type:Straddle
Capacity:2,000 lbs
Lift Height:60" - 144"
Fork Length:30" - 42"
Straddle OD:24.62" - 50"
Load Center:24"
Big Joe PDH
Big Joe PDH Type:Straddle
Capacity:2,000 - 4,000 lbs
Lift Height:106" - 194"
Fork Length:36" - 48"
Straddle OD:46" - 58"
Load Center:24"
Big Joe PDS25
Big Joe PDS25 Type:Straddle
Capacity:2,500 lbs
Lift Height:106" - 157"
Fork Length:36" - 48"
Straddle OD:44" - 56"
Load Center:24"
Big Joe PDM
Big Joe PDM Type:Straddle
Capacity:3,000 lbs
Lift Height:60" - 154"
Fork Length:44"
Straddle OD:50"
Load Center:24"
Application Help
Call 877-860-3620 & tell us your requirements or Email Us
Quick Quote
Let us know your specifications and we'll email you Request Quote
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us